CMD HACKING USE NETBIOS COMMAND

CMD HACKING USE NETBIOS COMMAND:

I am here tto discuss here about the Netbios command. This is the basic command to know more about IP with Command prompt. NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER. NETBIOS HACK IS THE EASIEST WAY

TO BREAK INTO A REMOTE COMPUTER.

STEP-BY-STEP NETBIOS HACKING ...

PROCEDURE:

1.Open command prompt

2. In the command prompt use the “net view” command

( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESS. BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).

Download IP tool

Example: C:\>net view \\128.100.1.16 The above is an example for operation using command prompt. “net view” is one of the netbios command to view the shared resources of the remote computer. Here “128.100.1.16″ is an IP address of remote computer that is to be hacked through Netbios. You have to substitute a vlaid IP address in it’s place. If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown. If not an error message is displayed. So repeat the procedure 2 with a different IP address.

3. After succeeding, use the “net use” command in the command prompt. The “net use” is another netbios command which makes it possible to hack remote drives or printers.

Example-1: C:\>net use D: \\128.100.1.16\F

Example-2: C:\>net use G: \\128.100.1.16\SharedDocs
Example-3: C:\>net use I: \\128.100.1.16\Myprint
NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES, FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER.

THAT IS, IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer.

These are displayed after giving “net use” command. “128.100.1.16″ is the IP address of remote computer that you want to hack.

4. After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer. Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name. You can open it and access remote computer’s Hard-Drive. You can copy files, music, folders etc. from victim’s hard-drive. You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system. You can access files/folders quickly through “Command Prompt”.

NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios. That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed). So Repeat The Procedure 2,3 With Different IP Address.

Leave your comments and suggestions .... End .....

___________________________________________________________________________________________

About BiggTrixs

Hello guys.If you need any help or have any questions in mind then you can comment below.If you want more tricks delivered to you for free then you can join our Free Email Newsletter. You can also join us on Facebook and Twitter to get our latest posts in your feed.